HDMI ARC and HDMI eARC explained: The evolution of the Audio Return Channel


ARC (the acronym stands for Audio Return Channel) is the digital conduit that TVs use to send their audio—whether it be from an onboard over-the-air tuner or an onboard or USB media streamer that connects to a movie service such as Netflix—over an HDMI cable to your soundbar or A/V receiver. So it should come as no surprise that the acronym eARC stands for enhanced Audio Return Channel

ARC is superior to older methods of carrying digital audio (e.g., fiber-optical cables with TOSLINK connectors, and coaxial copper cables with RCA connectors) because it can deliver bandwidth of 1Mbps—almost three times more than those older cables, which are limited to 384Kbps of bandwidth.

ARC has been “good enough” for many years, provided multi-channel soundtracks were compressed so they needed no more than 1Mbps of bandwidth. ARC cannot carry 5.1 channels of uncompressed audio or anything more than that, nor can it handle high-resolution soundtracks encoded in immersive, object-based formats such as Dolby Atmos and DTS:X.

Enhanced Audio Return Channel HDMI Licensing, LLC

The amount of bandwidth available for audio information has increased from about 1Mbps to 37Mbps, sufficient for all of the latest surround-sound codecs. 

eARC, introduced with the HDMI 2.1 standard, blows through that bandwidth limit, providing a staggering 37Mbps of bandwidth. A pipe that fat can not only carry eight channels of uncompressed surround sound, it can do it with up to 24-bit resolution and at sampling rates as high as 192kHz.

That level of resolution is massive overkill for many, of course, considering that most listeners can’t tell the difference between 44.1kHz/16-bit audio and 48kHz/24-bit audio, but it’s available for those high-def audio buffs who swear they can. Besides, headroom is never a bad thing.

bandwidth2 01 HDMI Forum

HDMI 2.1 is a very fat pipe, delivering more than four-and-a-half times the bandwidth of the HDMI 1.4 standard.

A more likely use for all that bandwidth will be to stream soundtracks encoded in immersive, object-based formats such as Dolby Atmos and DTS:X. Auro 3D has not been mentioned, though that should work fine, too. The important thing is that the audio in streamed media need no longer be inferior to what you get from Blu-ray and Ultra HD Blu-ray discs.

eARC doesn’t depend on HDMI 2.1

The really good news is that vendors can pick and choose which parts of the new HDMI standard they want to implement; they can add eARC without adding supporting for 8K video resolution, for instance. And eARC will play nice with older equipment, falling back to the older ARC standard when it needs to.

You’ll need eARC support at both ends of the cable to reap the maximum benefit from the new standard. That said, while there aren’t a lot of audio products currently supporting eARC, some devices might be upgradeable via firmware. Check with your vendor.



Source link