Taitien, a quartz frequency control component manufacturer, will be showcasing a variety of Crystals and Oscillators at the IMS 2022 that will be held in Denver (Colorado, USA) from 21-23 June 2022 at booth #3079. These are high precision low noise products required for 5G, RF and Microwave technologies. Taitien will also release new products at the IMS 2022 which include the NK-H type OCXO, DT-5151 High Stability Disciplined Timing Module and NA-100-6900 Low Phase Noise OCXO.
NK-H Type – Low Cost, High Stability, Miniature Low Phase Noise OCXO
The Taitien NK-H Type offers big OCXO performance in a small 14 x 9 mm package. Available from 10 MHz to 40 MHz, the 6-pin hermetic SMT package is ideal for outdoor applications such as small cell and IEEE-1588. With excellent long-term aging the stability is as low as ±10 ppb (-40°C to +85°C). The phase noise is <-145 dBc at 100 Hz and <-160 dBc at the floor.
DT-5151 – Low Cost, High Stability Disciplined Timing Module
The Taitien DT-5151 provides 5G networks, data centers and critical infrastructure with exceptional holdover and stability during GNSS interruptions. The DT-5151 is an Advanced Crystal Timing Module, disciplined by a 1 PPS synchronization signal utilizing proprietary algorithms to achieve atomic-level performance. It is disciplined to 1ns RMS in phase, <10-12 in frequency with 24-hour holdover of < 1.5 μS. The DT-5151 has an RS232 digital interface, is available at 5, 8.192 or 10MHz and -20° to 70°C range.
NA-100-6900 – 100 MHz Low Phase Noise OCXO with High Stability and Low G-sensitivity
The Taitien NA-100-6900 is a 100.000 MHz, high performance OCXO offering low noise and low G-sensitivity. Coming in a small 25 x 25 mm package it is ideal for portable for applications like Radar, Satellite, Test & Measurement or any application requiring big performance in a small package. The G-sensitivity is < 1 ppb/g, worst Axis and the phase noise available is <-135 dBc at 100 Hz and <-185 dBc at the floor. The stability over -40° to +85°C is a small ±200ppb.