Having a pool in your home or office campus is more than a luxury. It gives you a great place to relax and let go of the day’s hard work. And with the new and advanced pool accessories, you can also use the pool irrespective of the outside weather. However, there is one fact that has always been troublesome for pool owners which is cleaning out the pool.
On a daily basis, there is a lot of dust and dirt which will be added to your pool if it is not covered. On top of that, there are other impurities that are definitely hard to clean from a pool. To clean your pool efficiently, you will need a dedicated pool cleaner, preferably a suction pool cleaner. These cleaners act as a vacuum cleaner for your pool, allowing you to quickly and thoroughly clean your pool with minimal effort. Here are some things that you should know about a suction pool cleaner before you get one.
- Suction Strength: A suction pool cleaner works on a simple working principle where the pool pump sucks up the debris in the water and gathers them around at the bottom of the pool, or on the walls. But, not all suction pool cleaners are the same as the minimum flow rate required to use the suction pool cleaner varies from product to product. Generally, the flow rate has to be between 1600 to 2200 GPH for a standard suction pool cleaner to work properly.
- Hoses: Suction pool cleaners also include a dedicated hose that transports the debris collected from the pool to the pool filter. Therefore, the range up until which the suction pool cleaner can work depends upon the length of the hose attached to the unit. Another important factor for the hose is the diameter. You will need a suction pool cleaner attached to a hose of at least 1.5 inches in diameter so that it can clear out small as well as large-sized debris.
- Pool Size: What type of suction pool cleaner is perfect for your pool depends upon the overall size of your pool. For smaller, inground pools, the perfect option would be a similarly smaller suction pool cleaner that you can freely move across its surface area and corners. But for a larger pool, you should definitely pick a larger suction pool cleaner so that it can get the job finished at a faster rate.
A decent suction pool cleaner can certainly make the maintenance part of owning a pool easy and fast by automating the cleaning process. But for that, you will have to get your hands on the best suction pool cleaner you can find on the market. Since it may be difficult for a lot of buyers to verify each option carefully, we have done it for you. Here, we present a list of the best suction pool cleaners you can buy from your home right away. We will be explaining all of our choices in detail and also talk about the important properties of a suction pool cleaner in our Buying Guide.
Best Suction Pool Cleaner 2022
Best Suction Pool Cleaner Reviews
Zodiac is bringing the best and most popular option on our list of the best suction pool cleaners as far as powerful options are considered. Zodiac also has a couple more options for pool cleaners that are worth checking out.
Coming at the top of our picks, we have the Zodiac MX6 Automatic Pool Cleaner. This is one of the best options designed for in-ground pools since it has a great cleaning capacity and it offers fully automatic operation. The Zodiac MX6 Automatic Pool Cleaner is designed with an innovative low-flow design that adjusts with 2-speed and variable-speed pool pumps. On top of that, this suction pool cleaner generates cyclonic suction and generates a powerful vacuum to thoroughly clean your pool.
The articulated design of the turbine blades used in the Zodiac MX6 Automatic Pool Cleaner also allows for an aggressive cleaning of the pool walls which is not possible with most other basic options. You will also find swiveling hoses with this suction pool cleaner that lets you connect and disconnect the hose with ease. Unlike many basic options in the market, the Zodiac MX6 Automatic Pool Cleaner is backed by a 2-year long warranty period which is definitely an assurance of its build quality.
- Suitable for plastic pool surface
- Features a 2-year warranty period
- Great option for inground pools
- Works with variable-speed pumps
- Features swiveling hoses for ease of connection
- Expensive option for small-sized pools
On the other hand, if you are looking for an affordable yet durable choice, take a look at the suction pool cleaner made by AIPER. This is also a cordless option that works without a hose.
In the 2nd position, we are putting the AIPER Cordless Automatic Pool Cleaner. It has a 100% cordless design which eliminates the need for a power cord or even a hose for that matter. Thus, you will find this option to be extremely compact and portable. Still, it is compatible with pools varying up to 538 sq. ft. in area. Once it is started, it can clean the pool within 50 minutes to an hour, making the pool good as new and ready to use.
The AIPER Cordless Automatic Pool Cleaner has dual powerful motors that manage to create a strong suction which is necessary to clean from the inside. Also, there are dual brushes on the bottom which take care of all kinds of debris such as leaves, buds, dirt, etc. Since this is an automatic cleaner, it automatically docks itself near the wall of a pool if it’s running low on battery power. So, you can easily remove it from the water to charge the unit. The AIPER Cordless Automatic Pool Cleaner comes with a year of warranty which is good enough at this price point.
- Suitable for plastic pool surface
- Features a 1-year warranty period
- It has IPX8 water resistance
- Charges within 3 to 4 hours
- Automatically docks near pool wall when it is low on battery
- Weighs only 6.6 lbs
- Does not require any hose or power cord to work
- The battery lasts for about 50 minutes
Hayward is certainly a brand that first comes to mind while discussing pool accessories and other necessary tools. Apart from dedicated pool cleaners, Hayward also makes pumps, filters, pool heaters, and pool sanitizers that you should check out.
Our 3rd pick for this list of the best suction pool cleaners is the Hayward W32025ADV XL Suction Pool Cleaner. As the name indicates, this suction pool cleaner is designed for large pools, varying up to 600 sq. ft. in area. With that, the Hayward W32025ADV PoolVac XL Suction Pool Cleaner is granted with a superior wing design that works perfectly with vinyl pool surfaces. And the wings, paired with a wider vacuum inlet and constant suction power, makes the Hayward W32025ADV PoolVac XL Suction Pool Cleaner clean your pool efficiently.
You can also program the Hayward W32025ADV PoolVac XL Suction Pool Cleaner to work automatically thanks to its programmed cleaning feature. It has pre-programmed steering patterns that steer the machine over the surface of the pool as well as its wall without tangling with the hose. The advanced suction design of the Hayward W32025ADV PoolVac XL Suction Pool Cleaner also makes it one of the quietest options in the market. This suction pool cleaner is backed by a 2-year long warranty period.
- Suitable for vinyl pool surface
- Features a 2-year warranty period
- Automatic pre-programmed steering patterns
- Offers a silent operation
- Automatic pool cleaning is possible
- Easy to clean and maintain
- Suitable for up to 600 sq. ft. water bodies
- A bit on the expensive side
Pentair is also a highly reliable brand for suction pool cleaners and other similar pool accessories. Pentair also makes heaters, filters, heat pumps, and other pool accessories which you might need along with a suction pool cleaner.
The Pentair 360042 Kreepy Krauly is yet another reliable choice available on our picks for the best suction pool cleaner. This unit also performs best for inground pools having small to medium sizes. The Pentair 360042 Kreepy Krauly has a dive float directional system that manages to guide the cleaning unit to all corners of the pool and the surface area evenly for the perfect cleaning coverage. On top of that, it has an automatic valve that can regulate the water flow for more efficient cleaning.
There are roller straps on the Pentair 360042 Kreepy Krauly also helps the unit to maneuver around steps and ladders without any hurdles and clean all parts of the pool evenly. For debris that can clog the hose like dirt and leaves, there are special wings provided on the Pentair 360042 Kreepy Krauly that channels them directly to the filtration system. And with the traditional one-moving-part design aspect of the Pentair 360042 Kreepy Krauly, you won’t need to replace any wheel or gear on this unit.
- The outer body is made up of steel
- Features a 2-year warranty period
- Features a maintenance-free design
- Special cleaner wings to channel leaves
- Automatic valve to control the water flow rate
- Dive float directional system for perfect cleaning coverage
- Special roller straps for cleaning around steps and ladders
- Overall cleaning capacity is lesser than its competitors
Jandy is also bringing a powerful and premium option to our list of the best suction pool cleaners. Since Jandy is a renowned supplier of pool accessories, you can certainly trust its build quality and reliability.
The Jandy Zodiac Mx6 is yet another great option that we found which can clean large-sized pools with ease. It has a powerful and aggressive cleaning action powered by an intelligent bi-directional navigation system for perfect and thorough cleaning of the pool. It can also control the excess water flow through the cleaner to ensure an efficient and optimal cleaning performance. It can also work with a 2-speed or variable-speed pump if that’s what you are using with your swimming pool.
On the inside, the Jandy Zodiac Mx6 features articulated turbine blades so that the overall performance of the unit is highly efficient and silent. Thus, you can use this unit with low-flow pumps too without any problem. And with the dynamic water flow setting, you won’t have to worry about the debris getting stuck inside the suction pool cleaner at all. The Jandy Zodiac Mx6 has a year of warranty which is a bit short compared to other options.
- It has articulated turbine blades
- Features a 1-year warranty period
- Special cyclonic leaf catcher
- Dynamic water flow regulator
- Great option for large pools
- Intelligent navigation system
- Works with variable-speed pump
- Warranty period is too short for its price
You must have heard about VIVOHOME as this brand has been offering great products in the home appliances and accessories section for quite a long time. Thankfully, they also have a suction pool cleaner which happens to be the cheapest option on this list.
The VIVOHOME Automatic Suction Swimming Pool Cleaner is the perfect option that we could find for domestic inground as well as above ground pools. It is also a cheaper option in case you haven’t found the perfect option under your budget so far on this list. The VIVOHOME Automatic Suction Swimming Pool Cleaner offers a thorough and quiet cleaning performance that most users demand. Plus, it can clean your pool from top to bottom, finishing the job the way you expect.
The length of the hose as well as the flow of water through the machine is adjustable. With that, the VIVOHOME Automatic Suction Swimming Pool Cleaner manages to climb the walls of the pool as well as the steps around the entrance to avoid leaving a dirty spot. It can also work perfectly with a wide range of pool surfaces such as concrete, vinyl, fiberglass, PVC, etc. with the pool cleaner, you will also get 14 pieces of PVC pipes, offering a total hose length of about 36.7 feet.
- Suitable for concrete, vinyl, fiberglass, ABS, PVC, and TPU pool surfaces
- Features a 180-day warranty period
- Works with 0.5 HP or higher power pumps
- Comes with 36.7 feet long hose
- Adjustable hose length and water flow rate
- No tools are required to assemble the cleaner
- Cheapest option on this list
- Warranty period is too short
Buying Guide For The Best Suction Pool Cleaner
So far, we have notified you about the best options available on the market right now for a suction pool cleaner. But before you get your hands on one, you should consider understanding how a solution pool cleaner works so that you can make the right call. A suction pool cleaner works automatically and independently once you start the unit. The pool pump which circulates the water in your pool works with the suction pool cleaner to automatically clean the pool.
The suction produced by the pool pump is utilized by the suction pool cleaner to operate it freely. On top of that, a lot of suction pool cleaners have an adjustable and user-customizable configuration system that allows automated execution of the cleaning task by the schedule. If you are not sure how to pick up the perfect suction pool cleaner, you should definitely pay attention to our buying guide for the best suction pool cleaner present here. In this buying guide, we will talk about some important characteristics of a suction pool cleaner and how these factors affect their performance in real-time.
1. Required Pump Flow Rate
If there is one factor that can completely affect the performance and compatibility of a suction pool cleaner, it is the suction capacity. Suction pool cleaners utilize the pool pump in order to clean the pool. With the suction produced by the pool pump, a suction pool cleaner can suck up the debris and transfer them to the bottom of the pool or near the walls.
A lot of manufacturers mention the necessary pump flow rate required for the suction pool cleaner to work efficiently. Since it is a minimum rating, anything below that might not be a good deal for the said suction pool cleaner and you probably won’t get the performance and cleaning results that you expect. Generally, the flow rate needed by a standard suction pool cleaner lies between 1600 to 2200 GPH or gallons per hour. But, you should still check the rating provided by the manufacturer since that will give you an exact idea about the compatibility of the unit for your pool.
2. Hose Dimensions
Suction pool cleaners also have a hose attached to the unit which is equally important and responsible for a thorough cleaning session of the pool. Therefore, you should always check the dimensions of the hose attached to the suction pool cleaner before you finalize your choice. A standard pool cleaning job is done right only if the suction cleaner is attached to a hose having 1.5 inches diameter, if not higher. It gives a good transferring space for the debris to be transferred. If the hose diameter is lesser, the debris might get stuck inside the hose, rendering the suction pool cleaner completely useless.
Such units also require frequent maintenance which is not an ideal situation. Another important fact about the hose is the length of the hose. The overall range of the suction pool cleaner is as long as the hose attached to it. Therefore, you should pick an option that comes with a long hose. If not, make sure that it allows extension of the hose if needed in the future. If you are not sure what hose length is right for your pool, simply check the distance between the skimmer and the farthest corner of your pool. You should also factor in the depth of the pool in the equation to get the right idea.
3. Type of Pool Surface
As you might have noticed while going through our list of the best suction pool cleaners, not all options are exactly the same. Therefore, the performance and compatibility of suction pool cleaners will vary from one product to another. An important factor that affects the compatibility of the suction pool cleaner is the type of your pool surface. There are various types of pools that you may notice with gunite, concrete, vinyl, or even fiberglass surfaces.
And to buy the right suction pool cleaner for these pools, you need to choose the one that is compatible with the said type of the surface. Failing that, the suction pool cleaner may not achieve the proper suction strength needed to remove the debris effectively. Sometimes, the pool cleaner can also be too powerful for the pool surface and end up cracking or damaging the pool walls. Therefore, you should go with a suction pool cleaner which offers a versatile range of compatibility and works fine with most pool surface types.
4. Type and Intensity of Debris
Apart from the type of the pool, the type of debris you usually find in your pool also affects which type of suction pool cleaner you should buy. Since different suction pool cleaners have different specifications, they have differences in terms of which type of debris they can handle. Almost all standard options available on the market are capable of cleaning sediments and small, lightweight debris such as leaves and street dust.
The problem arrives when you factor in large debris. While some options can easily remove such debris from your pool efficiently, some will definitely struggle to do so. And some suction pool cleaners might also get clogged up in the process, forcing you to manually unclog the hose and start the cleaning process again. It all depends upon the design of the suction pool cleaner as well as the hose attached to the unit. Therefore, you should think about this factor before you decide which suction pool cleaner is perfect for your pool.
Q. How often should I use my suction pool cleaner?
The answer to this question depends upon the type of the pool, the number of users using the pool, and the frequency at which the pool is being used on a daily basis. For commercial or community pools, it is important to use the suction pool cleaner at least once a day to keep the pool water safe and hygienic. But for your private backyard pool, you can even use the suction pool cleaner once a week without any worries.
Q. Do suction pool cleaners make a lot of noise?
Generally, suction pool cleaners do not make a lot of noise. But it does not mean that all suction pool cleaners can be categorized as silent pool accessories. The ones that you will find a bit noisy are electric pool cleaners. On the other hand, manual pool cleaners are anything but noise since there are no moving parts in these units. A lot of manufacturers provide a decibel or dB rating with the suction pool cleaner, letting you know the approximate noise level of the said unit.
Q. Do suction pool cleaners use electricity?
Only electrical suction pool cleaners require you to plug the unit into an AC outlet before you can use them. Since we are discussing suction pool cleaners, you should know that these units operate on the pump installed in your pool. Therefore, these options do not require any external power source to run. But, the pool pump installed in your pool does operate on electricity, making the suction pool cleaner dependent on electricity indirectly. As for the power consumption, it depends on how long you need to use the pump while you are using the suction pool cleaner.
Almost all swimming pool owners can agree with the fact that removing dirt, leaves, debris, or any other type of impurity from the pool is a tiresome yet extremely crucial part of pool maintenance. If you were to clean the pool manually on a daily basis, it will consume a lot of time and energy. Thankfully, you won’t have to do that since there are a lot of pool accessories designed to do the job for you. One such accessory is a suction pool cleaner which you will certainly like for its benefits and considerably affordable price range. Today, we have brought you the best suction pool cleaners available along with detailed information about each option as well as a helpful buying guide to help you choose the perfect option from the lot. But if you are still not sure, take a look at our top recommendations for the best suction pool cleaners.
For basic home pool cleaning, there is no point in going for an overly expensive suction pool cleaner. Instead, you should go with the VIVOHOME Automatic Swimming Pool Sweeper. This unit comes with a 36 feet-long hose, making it suitable for 2.5 to 10 feet deep swimming pools. The VIVOHOME Automatic Swimming Pool Sweeper operates a minimum pump power of about 0.5 HP which is easily available with most standard pool pumps.
On the other hand, if you want the best pool cleaning experience, we will suggest going with the Jandy Zodiac Mx6 Automatic Suction Side Pool Cleaner. This unit has an intelligent bi-directional navigation system that can thoroughly clean the floor of your swimming pool as well as the walls and waterline. The Jandy Zodiac Mx6 Automatic Suction Side Pool Cleaner offers an ultra-efficient operation and also works with 2-speed or variable-speed pool pumps.
But if you want a budget-friendly yet a reliable option, we will suggest you the Pentair 360042 Kreepy Krauly suction pool cleaner. It also has the dive float directional system which helps the guide cleaner clean the pool thoroughly, from the water line to the bottom of the pool. The Pentair 360042 Kreepy Krauly has an automatic valve that regulates the flow of water by itself to minimize the travel distance of the suction pool cleaner. It also has dedicated cleaner wings that channels the leaves directly into the filtration system to avoid clogging the hose.