Withwave Introduces Multi-Coax Connectors and Flexible Cable Assemblies up to 67 GHz


Withwave Introduces Multi-Coax Connectors and Flexible Cable Assemblies up to 67 GHz

Withwave has introduced a wide range of multiple coax connectors and flexible cable assemblies. The High Speed & High-density Multicoax Cable Assemblies (WMX Series) are available in 20, 40, 50 & 67 GHz configurations based on a precision array design and high frequency cabling solutions. The WMX Series are excellent signal integrity solutions for bench-top testing and automated test equipment to meet increasing demands of semiconductor test equipment and optical testing industries.

These products consist of high-performance flexible assemblies which can be bundled in housings (8 Channels) and the interface to board is compression type which provides lower total cost of testing by avoiding costly soldering components. 16 Channel options are also available on request.

These interconnect solutions can be used for testing High speed modules and for supercomputing applications. They are also available as Board Edge Socket (BES) solutions that can be used at edge of the PCB for bench-top testing and automated test equipment to meet increasing demands of semiconductor test equipment and optical testing industries.

Click here to learn more WMX Cable Assemblies.

Key Features :

  • Frequency range : DC to 20, 40, 50 & 67 GHz
  • Excellent insertion and return loss performance
  • Board edge socket contact type(solderless)
  • No of Channels: 1×8 Channel (16 channel options available on request)

WMX Series Specifications

Scope Specification WMX20B WMX40B WMX50B
Electrical Frequency range max. 20 GHz 40 GHz 50 GHz
Electrical Operating range/data rate 20 Gbps 40 Gbps 50 Gbps
Electrical Impedance 50 Ohm 50 Ohm 50 Ohm
Electrical VSWR 1.4 1.5 1.6
Mechanical & Environmental PCB Contact Type Board Edge Socket Board Edge Socket Board Edge Socket
Mechanical & Environmental No. of Channel 1×8 1×8 1×8
Mechanical & Environmental Connector Type SMA 2.92 mm 2.4 mm
Mechanical & Environmental Pitch 2.54 mm 2.54 mm 2.54 mm
Mechanical & Environmental Cable out diameter 0.047 inch 0.047 inch 0.047 inch
Mechanical & Environmental Minimum Cable Length 80 mm (without bending jig) 150 mm (including bending jig) 80 mm (without bending jig) 150 mm (including bending jig) 80 mm (without bending jig) 150 mm (including bending jig)
Mechanical & Environmental Temperature -55 ~+125 Degree Celsius -55 ~+125 Degree Celsius -55 ~+125 Degree Celsius

Click here to learn more about Withwave’s High Speed & High-density Multicoax Cable Assemblies.



Source link