IMS 2026 (IEEE MTT-S International Microwave Symposium) will take place in Boston this year from 9–11 June 2026. This is the world’s leading event for RF and microwave professionals, bringing together industry and academic experts to showcase the latest innovations in wireless and communication technologies. In this story we have listed a few waveguide products that will be showcased at the event. Stop by the company booths to see these products.
Zero Bias Schottky Diode Dual-Band Direct Detectors
These zero-bias Schottky diode-based direct detectors cover waveguide bands from WR-19 to WR-1.5. Each detector can operate in two waveguide bands by simply exchanging the input flange used for RF signal injection. This concept enables continuous frequency coverage from 37 to 750 GHz using a set of just five units. The detectors provide excellent sensitivity, ranging from 9000 V/W in WR-15 down to 1000 V/W in WR-1.5. They deliver excellent linearity below –20 dBm RF input power, with an optimal signal-to-noise ratio of ~35 dB.
ACST GmbH Booth #24020
3D-Printed 16×16 MIMO Waveguide Antenna for mmWave Radar
This metal-coated polymer 3D-printed waveguide antenna is engineered for cascaded Texas Instruments AWR2188 mmWave sensor chips, delivering 16 Tx and 16 Rx channels. Designed for high-performance automotive and advanced radar systems, it provides scalable multi-channel antenna capability for demanding mmWave applications.
Golden Devices (Booth #22103)
WR-2.8 Orthomode Transducer for 260–400 GHz Systems
The OMT 2.8 is a WR-2.8 orthomode transducer designed for dual-polarized operation from 260 to 400 GHz. It provides broad bandwidth, low loss, and high isolation in a compact waveguide form factor. Suitable for communications research, radiometry, scientific instruments, and advanced testbeds, it supports space-constrained front-end integration.
Micro Harmonics Corp. (Booth #23024)
WR28 Power Combining System Assembly from 26.5–40 GHz
This WR28 power combining system assembly precisely combines 8 RF sources from 26.5 to 40 GHz. It uses six Magic-T components to ensure equal amplitude and phase for balanced signal combining. The system includes an X-guide coupler for sampling, HP terminations for protection, and a bulkhead output interface for secure connections. It is suitable for advanced radar and high-performance amplifier applications.
SMC (Booth #13050)
Waveguide Assemblies Built for Exact Fit & Fast Delivery
QuinStar delivers precision waveguide assemblies—waveguides, adapters, couplers, and custom transitions—engineered for exact tolerances and seamless integration. Backed by one of the nation’s largest raw waveguide inventories, they help reduce delays and support faster deployment. Designed, built, and tested in the U.S.
QuinStar (Booth #23029)
Integrated Waveguide Horn for Improved RF Performance
This integrated waveguide horn is designed and manufactured directly into a waveguide section, reducing interface connections and improving the performance while also providing easier fitment into the customer’s OEM system. The instrument uses an extruded waveguide with a precision-machined horn profile. The image shows a WG32/WR3 unit with a Standard Gain Horn of 15 dBi.
Flann Microwave (Booth #20023)
Dual Circular Polarized Q/V-Band Tx/Rx Antenna Feeding Network
The SAU-403503854-22-DCP1 is a dual circular polarized Q/V-band antenna feeding network for SATCOM earth stations, supporting 37.5–42.5 GHz Rx and 47.2–52.4 GHz Tx operation. It integrates a polarizer, OMT, and dual diplexers to enable simultaneous LHCP/RHCP Tx and Rx channels. The assembly provides ~0.6 dB insertion loss, 85 dB Tx-Rx isolation, and 0.5 dB axial ratio, with a 0.219” circular waveguide common port and WR-22 Tx/Rx waveguide ports with UG-383/U-M anti-cocking flanges.
Eravant (Booth #18076)