Timing devices serve next-gen Ethernet and PCIe



FemtoClock 4 and VersaClock 8 clock families from SiTime enable data-center bandwidth upgrades for Ethernet and PCIe racks, respectively. FemtoClock 4 generates ultra-low-jitter signals for Ethernet networking with high clock density. VersaClock 8 addresses PCIe interconnectivity with a low-power design well-suited for thermally constrained, high-density server trays.

Designed for top-of-rack and spine switches built on 224G SerDes, FemtoClock 4 functions as a jitter attenuator and clock generator. It achieves 19-fsRMS phase jitter at 312.5 MHz in clock generator mode (12 kHz to 20 MHz, 4-MHz high-pass filter) and provides up to six frequency domains across 18 outputs. The high output count can reduce the number of clock devices required in top-of-rack switches, which typically need more than 40 clocks.

VersaClock 8 generates programmable reference clocks for CPUs, xPUs, memory, and storage. It achieves about 10-fs reference clock jitter for PCIe 7 and 30-fsRMS phase jitter at 312.5 MHz (12 kHz to 20 MHz, 4-MHz high-pass filter). Its design limits self-heating and allows operation at temperatures up to 105°C. The family includes 5-, 9-, and 12-output variants in QFN packages ranging from 4×4 mm to 6×6 mm. The 12-output version is about 40% smaller than a comparable solution, according to SiTime.

FemtoClock 4 (RC38616, RC38412, RC32418, and RC32412) and VersaClock 8 (RC31312A, RC31309A, and RC31305A) are available now.

SiTime

The post Timing devices serve next-gen Ethernet and PCIe appeared first on EDN.



Source link